Overview
Terraform enables you to safely and predictably create, change, and improve infrastructure. It is an open source tool that codifies APIs into declarative configuration files that can be shared among co-workers, treated as code, edited, reviewed, and versioned.
Objectives
In this lab, you will learn how to perform the following tasks:
Get started with Terraform in Google Cloud.
Install Terraform from installation binaries.
Create a VM instance infrastructure using Terraform.
Setup and requirements
Read these instructions. Labs are timed and you cannot pause them. The timer, which starts when you click Start Lab, shows how long Google Cloud resources will be made available to you.
This hands-on lab lets you do the lab activities yourself in a real cloud environment, not in a simulation or demo environment. It does so by giving you new, temporary credentials that you use to sign in and access Google Cloud for the duration of the lab.
To complete this lab, you need:
- Access to a standard internet browser (Chrome browser recommended).
Note: Use an Incognito or private browser window to run this lab. This prevents any conflicts between your personal account and the Student account, which may cause extra charges incurred to your personal account.
- Time to complete the lab---remember, once you start, you cannot pause a lab.
Note: If you already have your own personal Google Cloud account or project, do not use it for this lab to avoid extra charges to your account.
How to start your lab and sign in to the Google Cloud console
Click the Start Lab button. If you need to pay for the lab, a pop-up opens for you to select your payment method. On the left is the Lab Details panel with the following:
The Open Google Cloud console button
Time remaining
The temporary credentials that you must use for this lab
Other information, if needed, to step through this lab
Click Open Google Cloud console (or right-click and select Open Link in Incognito Window if you are running the Chrome browser).
The lab spins up resources, and then opens another tab that shows the Sign in page.
Tip: Arrange the tabs in separate windows, side-by-side.
Note: If you see the Choose an account dialog, click Use Another Account.
If necessary, copy the Username below and paste it into the Sign in dialog.
student-04-cffb1d80cf0f@qwiklabs.net
You can also find the Username in the Lab Details panel.
Click Next.
Copy the Password below and paste it into the Welcome dialog.
SR0bolGeLCvV
You can also find the Password in the Lab Details panel.
Click Next.
Important: You must use the credentials the lab provides you. Do not use your Google Cloud account credentials.
Note: Using your own Google Cloud account for this lab may incur extra charges.
Click through the subsequent pages:
Accept the terms and conditions.
Do not add recovery options or two-factor authentication (because this is a temporary account).
Do not sign up for free trials.
After a few moments, the Google Cloud console opens in this tab.
Note: To view a menu with a list of Google Cloud products and services, click the Navigation menu at the top-left.
Activate Cloud Shell
Cloud Shell is a virtual machine that is loaded with development tools. It offers a persistent 5GB home directory and runs on the Google Cloud. Cloud Shell provides command-line access to your Google Cloud resources.
Click Activate Cloud Shell
at the top of the Google Cloud console.
When you are connected, you are already authenticated, and the project is set to your Project_ID, qwiklabs-gcp-02-e19aa2b3d4d2. The output contains a line that declares the Project_ID for this session:
Your Cloud Platform project in this session is set to qwiklabs-gcp-02-e19aa2b3d4d2
gcloud is the command-line tool for Google Cloud. It comes pre-installed on Cloud Shell and supports tab-completion.
- (Optional) You can list the active account name with this command:
gcloud auth list
- Click Authorize.
Output:
ACTIVE: *
ACCOUNT: student-04-cffb1d80cf0f@qwiklabs.net
To set the active account, run:
$ gcloud config set account `ACCOUNT`
- (Optional) You can list the project ID with this command:
gcloud config list project
Output:
[core]
project = qwiklabs-gcp-02-e19aa2b3d4d2
Note: For full documentation of gcloud, in Google Cloud, refer to the gcloud CLI overview guide.
Terraform is a tool for building, changing, and versioning infrastructure safely and efficiently. Terraform can manage existing, popular service providers and custom in-house solutions.
Configuration files describe to Terraform the components needed to run a single application or your entire data center. Terraform generates an execution plan describing what it will do to reach the desired state, and then executes it to build the described infrastructure. As the configuration changes, Terraform can determine what changed and create incremental execution plans that can be applied.
The infrastructure Terraform can manage includes both low-level components such as compute instances, storage, and networking, and high-level components such as DNS entries and SaaS features.
Key features
Infrastructure as code
Infrastructure is described using a high-level configuration syntax. This allows a blueprint of your data center to be versioned and treated as you would any other code. Additionally, infrastructure can be shared and re-used.
Execution plans
Terraform has a planning step in which it generates an execution plan. The execution plan shows what Terraform will do when you execute the apply command. This lets you avoid any surprises when Terraform manipulates infrastructure.
Resource graph
Terraform builds a graph of all your resources and parallelizes the creation and modification of any non-dependent resources. Because of this, Terraform builds infrastructure as efficiently as possible, and operators get insight into dependencies in their infrastructure.
Change automation
Complex changesets can be applied to your infrastructure with minimal human interaction. With the previously mentioned execution plan and resource graph, you know exactly what Terraform will change and in what order, which helps you avoid many possible human errors.
Terraform comes pre-installed in Cloud Shell.
- Open a new Cloud Shell tab, and verify that Terraform is available:
terraform
The resulting help output should be similar to this:
Usage: terraform [--version] [--help] [args]
The available commands for execution are listed below. The most common, useful commands are shown first, followed by less common or more advanced commands. If you're just getting started with Terraform, stick with the common commands. For the other commands, please read the help and docs before usage.
Common commands: apply Builds or changes infrastructure console Interactive console for Terraform interpolations destroy Destroy Terraform-managed infrastructure env Workspace management fmt Rewrites config files to canonical format get Download and install modules for the configuration graph Create a visual graph of Terraform resources import Import existing infrastructure into Terraform init Initialize a Terraform working directory output Read an output from a state file plan Generate and show an execution plan providers Prints a tree of the providers used in the configuration push Upload this Terraform module to Atlas to run refresh Update local state file against real resources show Inspect Terraform state or plan taint Manually mark a resource for recreation untaint Manually unmark a resource as tainted validate Validates the Terraform files version Prints the Terraform version workspace Workspace management
All other commands: debug Debug output management (experimental) force-unlock Manually unlock the terraform state state Advanced state management
Task 2. Build infrastructure
With Terraform installed, you can immediately start creating some infrastructure.
Configuration
The set of files used to describe infrastructure in Terraform is simply known as a Terraform configuration. In this section, you will write your first configuration to launch a single VM instance. The format of the configuration files can be found in the Terraform Language Documentation. We recommend using JSON for creating configuration files.
- In Cloud Shell, create an empty configuration file named
instance.tf with the following command:
touch instance.tf
Click Open Editor on the Cloud Shell toolbar.
To switch between Cloud Shell and the code editor, click Open Editor or Open Terminal as required, or click Open in a new window to leave the Editor open in a separate tab.
- Click the
instance.tf file and add the following content in it, replacing <PROJECT_ID> with your Google Cloud project ID:
resource "google_compute_instance" "terraform" {
project = "qwiklabs-gcp-02-e19aa2b3d4d2"
name = "terraform"
machine_type = "e2-medium"
zone = "us-west1-a"
boot_disk {
initialize_params {
image = "debian-cloud/debian-11"
}
}
network_interface {
network = "default"
access_config {
}
}
}
This is a complete configuration that Terraform is ready to apply. The general structure should be intuitive and straightforward.
The "resource" block in the instance.tf file defines a resource that exists within the infrastructure. A resource might be a physical component such as an VM instance.
The resource block has two strings before opening the block: the resource type and the resource name. For this lab, the resource type is google_compute_instance and the name is terraform. The prefix of the type maps to the provider: google_compute_instance automatically tells Terraform that it is managed by the Google provider.
Within the resource block itself is the configuration needed for the resource.
- In Cloud Shell, verify that your new file has been added and that there are no other
*.tf files in your directory, because Terraform loads all of them:
ls
Initialization
The first command to run for a new configuration—or after checking out an existing configuration from version control—is terraform init. This will initialize various local settings and data that will be used by subsequent commands.
Terraform uses a plugin-based architecture to support the numerous infrastructure and service providers available. Each "provider" is its own encapsulated binary that is distributed separately from Terraform itself. The terraform init command will automatically download and install any provider binary for the providers to use within the configuration, which in this case is just the Google provider.
- Download and install the provider binary:
terraform init
The Google provider plugin is downloaded and installed in a subdirectory of the current working directory, along with various other book keeping files. You will see an "Initializing provider plugins" message. Terraform knows that you're running from a Google project, and it is getting Google resources.
Installing hashicorp/google v4.77.0...
Note: Your version number may be higher.
The output specifies which version of the plugin is being installed and suggests that you specify this version in future configuration files to ensure that terraform init will install a compatible version.
- Create an execution plan:
terraform plan
Terraform performs a refresh, unless explicitly disabled, and then determines what actions are necessary to achieve the desired state specified in the configuration files. This command is a convenient way to check whether the execution plan for a set of changes matches your expectations without making any changes to real resources or to the state. For example, you might run this command before committing a change to version control, to create confidence that it will behave as expected.
Note: The optional -out argument can be used to save the generated plan to a file for later execution with terraform apply.
Apply changes
- In the same directory as the
instance.tf file you created, run this command:
terraform apply
This output shows the Execution Plan, which describes the actions Terraform will take in order to change real infrastructure to match the configuration. The output format is similar to the diff format generated by tools like Git.
There is a + next to google_compute_instance.terraform, which means that Terraform will create this resource. Following that are the attributes that will be set. When the value displayed is <computed>, it means that the value won't be known until the resource is created.
Example output:
An execution plan has been generated and is shown below.
Resource actions are indicated with the following symbols:
+ create
Terraform will perform the following actions:
# google_compute_instance.default will be created
+ resource "google_compute_instance" "default" {
+ can_ip_forward = false
+ cpu_platform = (known after apply)
+ deletion_protection = false
+ guest_accelerator = (known after apply)
+ id = (known after apply)
+ instance_id = (known after apply)
+ label_fingerprint = (known after apply)
+ machine_type = "e2-medium"
+ metadata_fingerprint = (known after apply)
+ name = "terraform"
+ project = "qwiklabs-gcp-42390cc9da8a4c4b"
+ self_link = (known after apply)
+ tags_fingerprint = (known after apply)
+ zone = "us-west1-c"
+ boot_disk {
+ auto_delete = true
+ device_name = (known after apply)
+ disk_encryption_key_sha256 = (known after apply)
+ kms_key_self_link = (known after apply)
+ source = (known after apply)
+ initialize_params {
+ image = "debian-cloud/debian-11"
+ labels = (known after apply)
+ size = (known after apply)
+ type = (known after apply)
}
}
+ network_interface {
+ address = (known after apply)
+ name = (known after apply)
+ network = "default"
+ network_ip = (known after apply)
+ subnetwork = (known after apply)
+ subnetwork_project = (known after apply)
+ access_config {
+ assigned_nat_ip = (known after apply)
+ nat_ip = (known after apply)
+ network_tier = (known after apply)
}
}
+ scheduling {
+ automatic_restart = (known after apply)
+ on_host_maintenance = (known after apply)
+ preemptible = (known after apply)
+ node_affinities {
+ key = (known after apply)
+ operator = (known after apply)
+ values = (known after apply)
}
}
}
Plan: 1 to add, 0 to change, 0 to destroy.
Do you want to perform these actions? Terraform will perform the actions described above. Only 'yes' will be accepted to approve.
Enter a value:
If the plan was created successfully, Terraform will now pause and wait for approval before proceeding. In a production environment, if anything in the Execution Plan seems incorrect or dangerous, it's safe to cancel here. No changes have been made to your infrastructure.
- For this case the plan looks acceptable, so type
yes at the confirmation prompt to proceed.
Executing the plan will take a few minutes because Terraform waits for the VM instance to become available.
After this, Terraform is all done!
Test completed task
Click Check my progress to verify your performed task. If you have completed the task successfully, you will receive an assessment score.
Create a VM instance in the us-west1 zone with Terraform.
Check my progress
- In the Google Cloud Console, on the Navigation menu, click Compute Engine > VM instances. The VM instances page opens and you'll see the VM instance you just created in the VM instances list.
Terraform has written some data into the terraform.tfstate file. This state file is extremely important: it keeps track of the IDs of created resources so that Terraform knows what it is managing.
- In Cloud Shell, inspect the current state:
terraform show
Example output:
# google_compute_instance.default:
resource "google_compute_instance" "default" {
can_ip_forward = false
cpu_platform = "Intel Haswell"
deletion_protection = false
guest_accelerator = []
id = "terraform"
instance_id = "3408292216444307052"
label_fingerprint = "42WmSpB8rSM="
machine_type = "e2-medium"
metadata_fingerprint = "s6I5s2tjfKw="
name = "terraform"
project = "qwiklabs-gcp-42390cc9da8a4c4b"
self_link = "https://www.googleapis.com/compute/v1/projects/qwiklabs-gcp-42390cc9da8a4c4b/zones/{{{project_0.default_zone}}}/instances/terraform"
tags_fingerprint = "42WmSpB8rSM="
zone = "{{{project_0.default_zone}}}"
boot_disk {
auto_delete = true
device_name = "persistent-disk-0"
source = "https://www.googleapis.com/compute/v1/projects/qwiklabs-gcp-42390cc9da8a4c4b/zones/{{{project_0.default_zone}}}/disks/terraform"
....
You can see that by creating this resource, you've also gathered a lot of information about it. These values can be referenced to configure additional resources or outputs.
Congratulations! You've built your first infrastructure with Terraform. You've seen the configuration syntax and an example of a basic execution plan and understand the state file.
Task 3. Test your understanding
The following multiple choice questions should reinforce your understanding of this lab's concepts. Answer them to the best of your abilities.
Terraform enables you to safely and predictably create, change, and improve infrastructure.
With Terraform, you can create your own custom provider plugins.
Solution of Lab
https://www.youtube.com/watch?v=u6UU3tI6wPw
```apache
curl -LO raw.githubusercontent.com/ePlus-DEV/storage/refs/heads/main/labs/GSP156/lab.sh
source lab.sh
```
Script Alternative
export ZONE=$(gcloud compute project-info describe --format="value(commonInstanceMetadata.items[google-compute-default-zone])")
curl -LO raw.githubusercontent.com/quiccklabs/Labs_solutions/master/Terraform%20Fundamentals/quicklabgsp156.sh
sudo chmod +x quicklabgsp156.sh
./quicklabgsp156.sh
